ISO 9000 and 10000 Quality Documents - 1994 to 2000 Development and Application
Price: $ 87.00 (USD)
Add to Cart
You will receive 0.3 credit (CE) upon completion of this course.
Have a question about this course? .
Course Description
Overview
This course is intended to give a review of how the ISO 900N:1987 Quality Standards progressed to the ISO 900N:1994 versions and then were transformed into ISO 9001:2000. Also the course describes how the complementary (guidance) documents were developed and coalesced into more compact versions. The course goes on to discuss the development of a quality system and to summarize experience with the ISO quality standards and future directions.
The course is arranged to be of value to both those who have developed or evaluated quality systems based on ISO 900N:1994 standards and their accompanying documents and those who began, or are planning to begin, the development or evaluation of quality systems using ISO 9001:2000 and its supporting documents. In order to fully understand and appreciate the ISO 9000:2000 quality documents, it is important to know something of the evolution process that the international quality standards have gone through.
The course material is divided into five parts:
The student must take a multiple-choice quiz consisting of twenty questions at the end of this course to obtain PDH credits.
Specific Knowledge or Skill Attained
This course teaches the following specific knowledge and skills:
State Board Acceptance
This course can be used by professional engineers to fulfill PDH requirements mandated by state and provincial licensing boards. Decatur Professional Development is an approved provider of continuing education in all states that pre-approve course providers. In all other states that mandate continuing education for engineers, it is the individual engineer's responsibility to determine the suitability of activities for PDH credit. The state boards typically accept online* courses that cover technical, managerial** or ethical content and which are relevant to the practice of engineering. The course must have a clear purpose or objective with a content that will maintain, improve or expand the skills and knowledge of the licensee's field of practice. For questions about your mandatory PDH requirements, visit the website of your state licensing board.
*Online courses are accepted by all state licensing boards that mandate continuing education. Other than New York (which limits online courses to 18 PDH) and Iowa (which limits online courses to 6 PDH), there are no limits placed by other states on the number of hours that can be earned through online continuing education. Consult with your state licensing board if you have any questions about the acceptability of online courses.
**The New York State Board of Engineers does not accept general office management courses, but will accept project management courses that are offered by an approved provider and that are technical in nature and contribute to the engineer's professional practice.
Back to Top
This course is intended to give a review of how the ISO 900N:1987 Quality Standards progressed to the ISO 900N:1994 versions and then were transformed into ISO 9001:2000. Also the course describes how the complementary (guidance) documents were developed and coalesced into more compact versions. The course goes on to discuss the development of a quality system and to summarize experience with the ISO quality standards and future directions.
The course is arranged to be of value to both those who have developed or evaluated quality systems based on ISO 900N:1994 standards and their accompanying documents and those who began, or are planning to begin, the development or evaluation of quality systems using ISO 9001:2000 and its supporting documents. In order to fully understand and appreciate the ISO 9000:2000 quality documents, it is important to know something of the evolution process that the international quality standards have gone through.
The course material is divided into five parts:
· Part I - Definitions -presents some key quality terms and their definitions.
· Part 2 - ISO Quality Documents in the 1990's - reviews ISO quality documents that were produced in the 1990's, includes application experience with the 1990's quality documents, and adds information about on-going work.
· Part 3 - The ISO 9000:2000 Series - summarizes development of the series, comments on the documents.
· Part 4 - Establishing A Quality System - considers the set-up of a sample quality system and provides observations.
· Part 5 - On-going International Standards Activity - insight into experience with the current documents and on future directions.
The student must take a multiple-choice quiz consisting of twenty questions at the end of this course to obtain PDH credits.
Specific Knowledge or Skill Attained
This course teaches the following specific knowledge and skills:
· Quality terms and definitions
· The evolution of quality documents in the 1990's
· The system requirements for ISO 9001, 9002 and 9003
· The strategic goals for the 9000 and 10000 series of documents
· The development of the quality standards from 2000 to 2004
· The elements and hierarchy of a quality system
· The future direction of quality standards development
State Board Acceptance
This course can be used by professional engineers to fulfill PDH requirements mandated by state and provincial licensing boards. Decatur Professional Development is an approved provider of continuing education in all states that pre-approve course providers. In all other states that mandate continuing education for engineers, it is the individual engineer's responsibility to determine the suitability of activities for PDH credit. The state boards typically accept online* courses that cover technical, managerial** or ethical content and which are relevant to the practice of engineering. The course must have a clear purpose or objective with a content that will maintain, improve or expand the skills and knowledge of the licensee's field of practice. For questions about your mandatory PDH requirements, visit the website of your state licensing board.
*Online courses are accepted by all state licensing boards that mandate continuing education. Other than New York (which limits online courses to 18 PDH) and Iowa (which limits online courses to 6 PDH), there are no limits placed by other states on the number of hours that can be earned through online continuing education. Consult with your state licensing board if you have any questions about the acceptability of online courses.
**The New York State Board of Engineers does not accept general office management courses, but will accept project management courses that are offered by an approved provider and that are technical in nature and contribute to the engineer's professional practice.
More Information
| Language | English |
| Course Length | 3.00 hours |
| Duration of Access | 365 Days |
| Continuing Education Credits | 0.3 |
| Instructor | Self Study |
| Vendor | PDH Engineer (Read more about PDH Engineer accreditation.) |
| Course Certification | Certificate of Completion |
Price: $ 87.00 (USD)
Add to Cart