Arsenic Treatment for Small Water Systems
Price: $ 87.00 (USD)
Add to Cart
You will receive 0.3 credit (CE) upon completion of this course.
Have a question about this course? .
Course Description
Overview
Arsenic is a naturally occurring element in the Earth's crust. Most arsenic in drinking water comes from natural rock formations, especially those of volcanic origin. Arsenic is primarily a groundwater issue. The new federal Arsenic Rule lowered the arsenic maximum contaminant level (MCL) from 50 ppb to 10 ppb and requires existing sources to be in compliance with the new MCL by January 2006.
In this course, the student will learn about arsenic treatment occurrences and processes. The student will learn treatment design using oxidation/filtration, ion exchange, sorption, as well as waste disposal methods.
The student is expected to read and review the material contained in Guidance Document: Arsenic Treatment For Small Water Systems, DOH Pub #331-210 November 2005.
The student must take a multiple-choice quiz consisting of sixteen (16) questions at the end of this course to earn PDH credits.
Specific Knowledge or Skill Attained
This course teaches the following specific knowledge and skills:
State Board Acceptance
This course can be used by professional engineers to fulfill PDH requirements mandated by state and provincial licensing boards. Decatur Professional Development is an approved provider of continuing education in all states that pre-approve course providers. In all other states that mandate continuing education for engineers, it is the individual engineer's responsibility to determine the suitability of activities for PDH credit. The state boards typically accept online* courses that cover technical, managerial** or ethical content and which are relevant to the practice of engineering. The course must have a clear purpose or objective with a content that will maintain, improve or expand the skills and knowledge of the licensee's field of practice. For questions about your mandatory PDH requirements, visit the website of your state licensing board.
*Online courses are accepted by all state licensing boards that mandate continuing education. Other than New York (which limits online courses to 18 PDH) and Iowa (which limits online courses to 6 PDH), there are no limits placed by other states on the number of hours that can be earned through online continuing education. Consult with your state licensing board if you have any questions about the acceptability of online courses.
**The New York State Board of Engineers does not accept general office management courses, but will accept project management courses that are offered by an approved provider and that are technical in nature and contribute to the engineer's professional practice.
Back to Top
Arsenic is a naturally occurring element in the Earth's crust. Most arsenic in drinking water comes from natural rock formations, especially those of volcanic origin. Arsenic is primarily a groundwater issue. The new federal Arsenic Rule lowered the arsenic maximum contaminant level (MCL) from 50 ppb to 10 ppb and requires existing sources to be in compliance with the new MCL by January 2006.
In this course, the student will learn about arsenic treatment occurrences and processes. The student will learn treatment design using oxidation/filtration, ion exchange, sorption, as well as waste disposal methods.
The student is expected to read and review the material contained in Guidance Document: Arsenic Treatment For Small Water Systems, DOH Pub #331-210 November 2005.
The student must take a multiple-choice quiz consisting of sixteen (16) questions at the end of this course to earn PDH credits.
Specific Knowledge or Skill Attained
This course teaches the following specific knowledge and skills:
· Arsenic occurrences
· Monitoring of arsenic
· Basic arsenic treatment design
· Pilot testing
· Arsenic publications
· Arsenic treatment cost curves
State Board Acceptance
This course can be used by professional engineers to fulfill PDH requirements mandated by state and provincial licensing boards. Decatur Professional Development is an approved provider of continuing education in all states that pre-approve course providers. In all other states that mandate continuing education for engineers, it is the individual engineer's responsibility to determine the suitability of activities for PDH credit. The state boards typically accept online* courses that cover technical, managerial** or ethical content and which are relevant to the practice of engineering. The course must have a clear purpose or objective with a content that will maintain, improve or expand the skills and knowledge of the licensee's field of practice. For questions about your mandatory PDH requirements, visit the website of your state licensing board.
*Online courses are accepted by all state licensing boards that mandate continuing education. Other than New York (which limits online courses to 18 PDH) and Iowa (which limits online courses to 6 PDH), there are no limits placed by other states on the number of hours that can be earned through online continuing education. Consult with your state licensing board if you have any questions about the acceptability of online courses.
**The New York State Board of Engineers does not accept general office management courses, but will accept project management courses that are offered by an approved provider and that are technical in nature and contribute to the engineer's professional practice.
More Information
| Language | English |
| Course Length | 3.00 hours |
| Duration of Access | 365 Days |
| Continuing Education Credits | 0.3 |
| Instructor | Self Study |
| Vendor | PDH Engineer (Read more about PDH Engineer accreditation.) |
| Course Certification | Certificate of Completion |
Price: $ 87.00 (USD)
Add to Cart